|
|
 |
>
PRODUCTS
PRODUCTS
RESIDENTIALS
 
LAMP
COMPARTMENT
  
>
MECHANICAL DATA, ORDERING DATA & PHOTOMETRIC
CURVES >
DOWNLOAD PDF
>
DOWNLOAD LDT
OTHER PRODUCTS
IN THIS
RANGE:
>
ARKA
>
SOLEX
|
.:SOLEX
RESIDENTIALS
RANGE
Solex® is a high specification, high performance wall
pack luminaire suitable for use with a wide range of energy saving
HID lamps from 70W/100W/150W HPS, 70W/100W/175W MBI and 80W/125W MBF.
APPLICATIONS
The Solex® luminaire can be used in areas that require optimum
vertical illumination with glare control at low mounting heights.
Ideal for parking garages, greenhouses, garden centers and low
profile industrial aisels and difficult environmental conditions
where maximum security is essential. The high performance of this
luminaire with all type of energy saving HID lamps, combined with
the IP 65 ingress protection provides an ideal luminaire to be used
also in exposed areas such as harbour quays, railway stations,
service stations, food industries, pharmaceutical industries, steel
works and ship yards .
CONSTRUCTION
Housing: is made of rugged, heavy die cast aluminium.
Optics: one piece injection-moulded, 100% virgin clear acrylic. The
refractor is attached on the housing by no. 3 stainless steel clips
and remains hinged to the housing during maintenance. A special
silicon gasket is used between the housing and the refractor.
ELECTRICAL
Control gear is rated 230V or 240V 50Hz as standard. HPS and MBI
circuits are fitted with superimposed pulse electronic ignitors as
standard, minimising the possibility of ballast failure in prolonged
operation with a failed lamp inserted. A three pole terminal block
for mains connection is provided. High temperture silicon insulated
conductors are used throughout.
MECHANICAL
Solex® can be directly mounted on the ceiling by the quick - mount
attachment plate. The plate is hinged to the fixture housing during
installation. Fixture is then twist locked into place and secured in
a weather proof installation. Solex® can be also pole or arm mounted.
The power supply enters through a PG 13.5 cable gland. The body can
be fully opened up and the gear tray completely removed, this
guarantees a simple and rapid maintenance operation.
SPECIFICATION
Designed in accordance with the following Standards: CEI 34-2 and
EN60598-1
|
