|
|
 |
>
PRODUCTS
PRODUCTS
HIGH-BAY /
LOW-BAY LUMINAIRES
LAMP
COMPARTMENT
>
MECHANICAL DATA, ORDERING DATA & PHOTOMETRIC
CURVES >
DOWNLOAD PDF
>
DOWNLOAD LDT
OTHER PRODUCTS
IN THIS
RANGE:
>
LUNIS
> LUNET
>
POLAR
>
POLAR
1000
>
PREMIUS
>
POLARIS
>
LUNAR
>
SOLAR
>
SOLAR RECESSED |
.:SOLAR
LOW-BAY
LUMINAIRES
RANGE
This comprehensive range of shallow profile industrial luminaires
offers an effective solution to a wide variety of lighting
applications. Versions are available for use with many different
high intensity discharge lamps i.e. 150W/250W/400W HPS, 250W/400W
MBI and MBF.
APPLICATIONS
This luminare allows the use of energy saving discharge lamps at
comparatively low mounting heights or in situations where a shallow
luminaire is required such as in areas using overhead cranes or
moving guantries or below mezzanine. The wide range of accessories
available extend the use of this luminaire into DIY/furniture
warehouses, sports halls etc. For sports halls wire guard can give
the ultimate protection against impact. The wide range of lamp
options enable selection of the optimum combination of lamp
efficiency and colour rendering to suit many different applications.
CONSTRUCTION
The luminaire body is formed from robust zinc treated sheet of
steel. A frame which hinges to the luminaire body provids safe
fixing of the gear tray and accessories i.e. louvre, wire guard or
protection glass and facilitates lamp changing. The gear tray can be
removed during fixing of the luminaire body to allow quick and easy
installation. The high purity dimpled aluminium reflector is
designed to optimise the output of modern tubular discharge lamps.
The luminaire body is finished in a durable powder coated polyester
white paint.
ELECTRICAL
Control gear is rated 230V or 240V 50Hz as standard. HPS and MBI
circuits are fitted with superimposed pulse electronic ignitors as
standard,minimising the possibility of ballast failure in prologed
operation with a failed lamp inserted. A three pole terminal block
for mains connection is provided. High temperture silicon insulated
conductors are used throughout.
MECHANICAL
"Keyholes" are provided in the rear of the luminaire body to
facilitate use of 20mm conduit entry/suspensions or standard hooks
for chain suspension. Surface mounting or B.E.S.A. box attachment
can also be acheived by use of the suspension bracket. This bracket
can also be used for direct mounting to trunking systems when only
short reach suspension bushes are available .
ACCESSORIES
Wire guard: a flat wire guard for impact protection.
Tempered glass: to contain fragments in the event of lamp fracture .
Louvre: a white louvre to provide additional glare control.
Anti black-out lamp sensor: an electronic sensor detects a failed or
extinguished lamp due to mains interuption induced restrike delay.
An integral auxillary lamp is switched on to provide safety
illumination.
When the main lamp is on, the auxillary is automatically switched
off .
SPECIFICATION
Designed in accordance with the following Standards: CEI 34-2 and
EN60598-1.
|
